Skip to main content
Skip header
Heavy laboratory

The spatially largest room in pavilion "F" is divided into three laboratories based on its use:

  1. Explosivity laboratory
  2. Laboratory of mechanical testing of materials
  3. Laboratory - SBI test

List of devices

Explosion Autoclave VA 250 l

The VA-250 explosion autoclave has a combustion chamber volume of 250 l and is intended for determining the explosion parameters of flammable gases, vapours of flammable liquids and flammable dusts, or their combinations. Explosion parameters can be determined both under standard conditions and at elevated initial temperatures, which may better correspond to the conditions in practice.

Explosion Autoclave 20 l KSEP

The VA-20 explosion autoclave has a combustion chamber volume of 20 l and is primarily intended for determining the explosion parameters of combustible dusts. Alternatively, the explosion parameters of the gases, or a combination of flammable dusts and gases, can be determined. Explosion parameters can be determined under standard conditions.

FS500 CT Tear Tester

The universal FS500 CT tear testing machine enables the measurement of mechanical properties of metallic and non-metallic materials at normal and elevated temperatures according to the relevant standards. To measure mechanical properties at elevated temperatures the tear machine is equipped with an electric three-zone vertical furnace of type 4011T-3Z with a range of measured temperatures up to 1100 °C.